12 models
WC and Shower Container
A WC and shower container provides sanitary facilities for several users through individual compartments or shared arrangements. Toilets, basins, urinals, showers and changing areas…
Illustrative product visual · layout and equipment vary by project.
WC & shower containers
Toilet and Shower Cabin
A toilet and shower cabin creates a compact sanitary space for one user or a small group. Toilets, basins and showers may be arranged together or separately according to the intended use. In a small footprint, door movement, access to fittings and space for cleaning deserve particular attention. The floor-area options help balance the space available with the expected intensity of daily use.
Dimensions, equipment and delivery scope are confirmed in the approved project.
A CLOSER LOOK
Details that respond
to your requirements.
A toilet and shower cabin creates a compact sanitary space for one user or a small group. Toilets, basins and showers may be arranged together or separately according to the intended use. In a small footprint, door movement, access to fittings and space for cleaning deserve particular attention. The floor-area options help balance the space available with the expected intensity of daily use.
A compact size does not remove infrastructure requirements. Water, drainage, hot-water and electrical connection positions need to be known before installation. Finishes suitable for wet use, ventilation and floor selection influence daily operation. Where accessibility is required, door width, manoeuvring space and fittings must be designed accordingly; a small standard model should not automatically be assumed suitable. Catalogue plans make the relationship between equipment and available space easier to discuss at an early stage.
For gardens, facilities, events or site use, share the user profile and expected duration of operation. Confirming transport, ground preparation and utility connection responsibilities helps assess whether the proposed cabin fits the location. Presenting the equipment list and layout together makes options easier to compare.
Dimensions, layouts and material values in the catalogue describe sample configurations. Models with the same floor area can have different layouts or equipment. The final structure, insulation, fire strategy, services and connections are established through the approved project for its actual use and site loads. State the preferred configuration, quantity, delivery location and main requirements when requesting a quotation.
MODEL OPTIONS
Choose the area.
Explore the layout.
Choose the floor area and layout that fit your needs.
3 m²
3 m² · Layout A
1.50 x 2.00 mThe proposed arrangement for this 3 m² configuration is: a single WC, corner shower and washbasin. Layout and technical scope are finalised in the approved project for the site and its users.
Enquire about this model ↗| Model / Area | 3 m² WC & Shower Cabin model |
|---|---|
| Approximate external dimensions | 1.50 x 2.00 m |
| Layout | a single WC, corner shower and washbasin |
| Container / cabin height | External 2.50 m; approximate clear internal height 2.30 m |
| Structural system | Welded or bolted galvanised steel frame; sized for the structural design loads |
| External wall | 50 mm rock-wool-filled sandwich panel with painted galvanised sheet-metal faces |
| Internal wall | Water-resistant panel partitions with compact laminate or ceramic finishes in wet zones |
| Roof | Galvanised trapezoidal sheet, condensation-control layer, 50–80 mm rock-wool/EPS thermal insulation and concealed or exposed rainwater drainage |
| Floor | Water-resistant cement board with slip-resistant homogeneous vinyl or ceramic finish, laid to falls toward floor drains |
| External door | Insulated steel external door, approximately 90 × 210 cm |
| Window | PVC frames with double glazing and optional insect screen |
| Electrical installation | Flame-retardant cable trunking/conduit, residual-current protection, earthing, LED lighting and sufficient socket circuits |
| Plumbing | PPRC clean-water lines, PVC wastewater lines, water-heater connection, floor drains and service valves |
| Climate control | Split air-conditioning provision sized by load calculation, with natural or mechanical ventilation options |
| Fire and safety | Smoke detection, emergency lighting and fire-extinguisher provision to suit the occupancy class and local regulations |
Plans show example layouts. Dimensions, materials and equipment are confirmed for your project.
6 m²
6 m² · Layout A
2.00 x 3.00 mThe proposed arrangement for this 6 m² configuration is: separate WC and shower or changing compartments. Layout and technical scope are finalised in the approved project for the site and its users.
Enquire about this model ↗| Model / Area | 6 m² WC & Shower Cabin model |
|---|---|
| Approximate external dimensions | 2.00 x 3.00 m |
| Layout | separate WC and shower or changing compartments |
| Container / cabin height | External 2.50 m; approximate clear internal height 2.30 m |
| Structural system | Welded or bolted galvanised steel frame; sized for the structural design loads |
| External wall | 50 mm rock-wool-filled sandwich panel with painted galvanised sheet-metal faces |
| Internal wall | Water-resistant panel partitions with compact laminate or ceramic finishes in wet zones |
| Roof | Galvanised trapezoidal sheet, condensation-control layer, 50–80 mm rock-wool/EPS thermal insulation and concealed or exposed rainwater drainage |
| Floor | Water-resistant cement board with slip-resistant homogeneous vinyl or ceramic finish, laid to falls toward floor drains |
| External door | Insulated steel external door, approximately 90 × 210 cm |
| Window | PVC frames with double glazing and optional insect screen |
| Electrical installation | Flame-retardant cable trunking/conduit, residual-current protection, earthing, LED lighting and sufficient socket circuits |
| Plumbing | PPRC clean-water lines, PVC wastewater lines, water-heater connection, floor drains and service valves |
| Climate control | Split air-conditioning provision sized by load calculation, with natural or mechanical ventilation options |
| Fire and safety | Smoke detection, emergency lighting and fire-extinguisher provision to suit the occupancy class and local regulations |
Plans show example layouts. Dimensions, materials and equipment are confirmed for your project.
9 m²
9 m² · Layout A
3.00 x 3.00 mThe proposed arrangement for this 9 m² configuration is: a standard WC, accessible WC, shower and shared washbasin. Layout and technical scope are finalised in the approved project for the site and its users.
Enquire about this model ↗| Model / Area | 9 m² WC & Shower Cabin model |
|---|---|
| Approximate external dimensions | 3.00 x 3.00 m |
| Layout | a standard WC, accessible WC, shower and shared washbasin |
| Container / cabin height | External 2.50 m; approximate clear internal height 2.30 m |
| Structural system | Welded or bolted galvanised steel frame; sized for the structural design loads |
| External wall | 50 mm rock-wool-filled sandwich panel with painted galvanised sheet-metal faces |
| Internal wall | Water-resistant panel partitions with compact laminate or ceramic finishes in wet zones |
| Roof | Galvanised trapezoidal sheet, condensation-control layer, 50–80 mm rock-wool/EPS thermal insulation and concealed or exposed rainwater drainage |
| Floor | Water-resistant cement board with slip-resistant homogeneous vinyl or ceramic finish, laid to falls toward floor drains |
| External door | Insulated steel external door, approximately 90 × 210 cm |
| Window | PVC frames with double glazing and optional insect screen |
| Electrical installation | Flame-retardant cable trunking/conduit, residual-current protection, earthing, LED lighting and sufficient socket circuits |
| Plumbing | PPRC clean-water lines, PVC wastewater lines, water-heater connection, floor drains and service valves |
| Climate control | Split air-conditioning provision sized by load calculation, with natural or mechanical ventilation options |
| Fire and safety | Smoke detection, emergency lighting and fire-extinguisher provision to suit the occupancy class and local regulations |
Plans show example layouts. Dimensions, materials and equipment are confirmed for your project.
6 m²
6 m² · Layout B
3 × 2 mThe proposed arrangement for this 6 m² configuration is: WC, Shower, Washbasin. Layout and technical scope are finalised in the approved project for the site and its users.
Enquire about this model ↗| Model | 6 m² Toilet & Shower Cabin Model |
|---|---|
| Gross floor area | Approximately 6 m² |
| External dimensions | 3 × 2 m |
| Building height | 2.50 m |
| Clear internal height | Approximately 2.30–2.55 m, depending on roof and service design |
| Structural system | Galvanised light-steel floor frame, posts and roof frame; sized for the project loads |
| Internal wall | 50 mm painted panel or plasterboard-lined light steel partition; moisture-resistant finish in wet areas |
| External wall | 50–80 mm insulated sandwich panel with painted galvanised sheet-metal faces; core selected for the climate |
| Roof | Galvanised structure, vapour-control layer, 80–100 mm insulation and waterproof outer covering |
| Floor | Slip-resistant wet-area finish over waterproofing; controlled fall towards the floor drain |
| External door | Moisture-resistant external door and lockable individual compartment doors |
| Internal doors | Laminate, PVC or moisture-resistant compact doors selected for the use area |
| Windows | Double-glazed PVC or thermally broken aluminium frames; opening sash and insect-screen options |
| Electrical installation | Halogen-free cabling, LED lighting, power/data points and provision for RCD-protected distribution board |
| Plumbing | Combined service run for clean water, hot water, wastewater, drains and valves, with maintenance access |
| Thermal and acoustic insulation | Specified by project according to climate zone, occupancy period, fire strategy and acoustic target |
| Room programme | WC, Shower, Washbasin |
Plans show example layouts. Dimensions, materials and equipment are confirmed for your project.
12 m²
12 m² · Layout B
4 × 3 mThe proposed arrangement for this 12 m² configuration is: WC 1, WC 2, Shower 1, Shower 2, Washbasin. Layout and technical scope are finalised in the approved project for the site and its users.
Enquire about this model ↗| Model | 12 m² Toilet & Shower Cabin Model |
|---|---|
| Gross floor area | Approximately 12 m² |
| External dimensions | 4 × 3 m |
| Building height | 2.50 m |
| Clear internal height | Approximately 2.30–2.55 m, depending on roof and service design |
| Structural system | Galvanised light-steel floor frame, posts and roof frame; sized for the project loads |
| Internal wall | 50 mm painted panel or plasterboard-lined light steel partition; moisture-resistant finish in wet areas |
| External wall | 50–80 mm insulated sandwich panel with painted galvanised sheet-metal faces; core selected for the climate |
| Roof | Galvanised structure, vapour-control layer, 80–100 mm insulation and waterproof outer covering |
| Floor | Slip-resistant wet-area finish over waterproofing; controlled fall towards the floor drain |
| External door | Moisture-resistant external door and lockable individual compartment doors |
| Internal doors | Laminate, PVC or moisture-resistant compact doors selected for the use area |
| Windows | Double-glazed PVC or thermally broken aluminium frames; opening sash and insect-screen options |
| Electrical installation | Halogen-free cabling, LED lighting, power/data points and provision for RCD-protected distribution board |
| Plumbing | Combined service run for clean water, hot water, wastewater, drains and valves, with maintenance access |
| Thermal and acoustic insulation | Specified by project according to climate zone, occupancy period, fire strategy and acoustic target |
| Room programme | WC 1, WC 2, Shower 1, Shower 2, Washbasin |
Plans show example layouts. Dimensions, materials and equipment are confirmed for your project.
18 m²
18 m² · Layout B
6 × 3 mThe proposed arrangement for this 18 m² configuration is: WC 1, WC 2, Shower 1, Shower 2, Changing Area, Washbasin, Technical Niche. Layout and technical scope are finalised in the approved project for the site and its users.
Enquire about this model ↗| Model | 18 m² Toilet & Shower Cabin Model |
|---|---|
| Gross floor area | Approximately 18 m² |
| External dimensions | 6 × 3 m |
| Building height | 2.50 m |
| Clear internal height | Approximately 2.30–2.55 m, depending on roof and service design |
| Structural system | Galvanised light-steel floor frame, posts and roof frame; sized for the project loads |
| Internal wall | 50 mm painted panel or plasterboard-lined light steel partition; moisture-resistant finish in wet areas |
| External wall | 50–80 mm insulated sandwich panel with painted galvanised sheet-metal faces; core selected for the climate |
| Roof | Galvanised structure, vapour-control layer, 80–100 mm insulation and waterproof outer covering |
| Floor | Slip-resistant wet-area finish over waterproofing; controlled fall towards the floor drain |
| External door | Moisture-resistant external door and lockable individual compartment doors |
| Internal doors | Laminate, PVC or moisture-resistant compact doors selected for the use area |
| Windows | Double-glazed PVC or thermally broken aluminium frames; opening sash and insect-screen options |
| Electrical installation | Halogen-free cabling, LED lighting, power/data points and provision for RCD-protected distribution board |
| Plumbing | Combined service run for clean water, hot water, wastewater, drains and valves, with maintenance access |
| Thermal and acoustic insulation | Specified by project according to climate zone, occupancy period, fire strategy and acoustic target |
| Room programme | WC 1, WC 2, Shower 1, Shower 2, Changing Area, Washbasin, Technical Niche |
Plans show example layouts. Dimensions, materials and equipment are confirmed for your project.
4 m²
4 m² · Layout C
2.0 × 2.0 mThis 4 m² sample configuration helps compare layout and equipment choices for a toilet and shower cabin. The final arrangement, connections and technical values are established through project approval.
Enquire about this model ↗| External dimensions | 2.0 × 2.0 m |
|---|---|
| Container height | 2.50 m |
| Clear internal height | 2.25 m |
| Structural system | Galvanised lightweight steel bolted frame |
| Internal wall | Water-resistant hygienic panel with sealed joint profiles |
| External wall | 50 mm insulated sandwich panel; RAL colour options |
| Roof | Galvanised structure, trapezoidal sheet, vapour barrier and 80 mm insulation; rainwater drainage |
| External door | 900 × 2100 mm insulated steel external door |
| Internal door | Laminated internal doors; moisture-resistant doors in wet areas |
| Window | High-level obscured-glass PVC/aluminium windows |
| Floor | Slip-resistant wet-area finish with controlled falls to floor drains |
| Electrical installation | RCD-protected distribution board, LED lighting, socket circuit and earthing |
| Plumbing | PPRC clean-water lines, PVC wastewater lines, floor drain, ventilation and hot-water provision |
| Insulation | 50 mm wall and 80 mm roof insulation; can be increased for the climate zone |
Plans show example layouts. Dimensions, materials and equipment are confirmed for your project.
6 m²
6 m² · Layout C
2.0 × 3.0 mThis 6 m² sample configuration helps compare layout and equipment choices for a toilet and shower cabin. The final arrangement, connections and technical values are established through project approval.
Enquire about this model ↗| External dimensions | 2.0 × 3.0 m |
|---|---|
| Container height | 2.50 m |
| Clear internal height | 2.25 m |
| Structural system | Galvanised lightweight steel bolted frame |
| Internal wall | Water-resistant hygienic panel with sealed joint profiles |
| External wall | 50 mm insulated sandwich panel; RAL colour options |
| Roof | Galvanised structure, trapezoidal sheet, vapour barrier and 80 mm insulation; rainwater drainage |
| External door | 900 × 2100 mm insulated steel external door |
| Internal door | Laminated internal doors; moisture-resistant doors in wet areas |
| Window | High-level obscured-glass PVC/aluminium windows |
| Floor | Slip-resistant wet-area finish with controlled falls to floor drains |
| Electrical installation | RCD-protected distribution board, LED lighting, socket circuit and earthing |
| Plumbing | PPRC clean-water lines, PVC wastewater lines, floor drain, ventilation and hot-water provision |
| Insulation | 50 mm wall and 80 mm roof insulation; can be increased for the climate zone |
Plans show example layouts. Dimensions, materials and equipment are confirmed for your project.
9 m²
9 m² · Layout C
3.0 × 3.0 mThis 9 m² sample configuration helps compare layout and equipment choices for a toilet and shower cabin. The final arrangement, connections and technical values are established through project approval.
Enquire about this model ↗| External dimensions | 3.0 × 3.0 m |
|---|---|
| Container height | 2.50 m |
| Clear internal height | 2.25 m |
| Structural system | Galvanised lightweight steel bolted frame |
| Internal wall | Water-resistant hygienic panel with sealed joint profiles |
| External wall | 50 mm insulated sandwich panel; RAL colour options |
| Roof | Galvanised structure, trapezoidal sheet, vapour barrier and 80 mm insulation; rainwater drainage |
| External door | 900 × 2100 mm insulated steel external door |
| Internal door | Laminated internal doors; moisture-resistant doors in wet areas |
| Window | High-level obscured-glass PVC/aluminium windows |
| Floor | Slip-resistant wet-area finish with controlled falls to floor drains |
| Electrical installation | RCD-protected distribution board, LED lighting, socket circuit and earthing |
| Plumbing | PPRC clean-water lines, PVC wastewater lines, floor drain, ventilation and hot-water provision |
| Insulation | 50 mm wall and 80 mm roof insulation; can be increased for the climate zone |
Plans show example layouts. Dimensions, materials and equipment are confirmed for your project.
4 m²
4 m² · Layout D
2.0 x 2.0 mThe proposed arrangement for this 4 m² configuration is: Approximately 2 independent use compartments. Layout and technical scope are finalised in the approved project for the site and its users.
Enquire about this model ↗| Model floor area | 4 m² gross concept area |
|---|---|
| Approximate external dimensions | 2.0 x 2.0 m |
| Container height | 2.50 m external / approx. 2.20 m clear |
| Structural system | Galvanised light-steel cabin frame |
| External wall | 50 mm rock-wool insulated sandwich panel |
| Internal wall | Compact laminate and wet-area board |
| Roof | Galvanised covering, insulation and membrane |
| Floor | Slip-resistant ceramic over waterproofing |
| External door | 80 × 200 cm moisture-resistant steel door |
| Window | High-level PVC frames with frosted glass |
| Electrical installation | Concealed or surface-mounted wiring according to the project, LED lighting and residual-current protection |
| Mechanical services | Fresh water, drainage and hot-water infrastructure |
| Capacity note | Approximately 2 independent use compartments |
Plans show example layouts. Dimensions, materials and equipment are confirmed for your project.
8 m²
8 m² · Layout D
2.0 x 4.0 mThe proposed arrangement for this 8 m² configuration is: Approximately 2 independent use compartments. Layout and technical scope are finalised in the approved project for the site and its users.
Enquire about this model ↗| Model floor area | 8 m² gross concept area |
|---|---|
| Approximate external dimensions | 2.0 x 4.0 m |
| Container height | 2.50 m external / approx. 2.20 m clear |
| Structural system | Galvanised light-steel cabin frame |
| External wall | 50 mm rock-wool insulated sandwich panel |
| Internal wall | Compact laminate and wet-area board |
| Roof | Galvanised covering, insulation and membrane |
| Floor | Slip-resistant ceramic over waterproofing |
| External door | 80 × 200 cm moisture-resistant steel door |
| Window | High-level PVC frames with frosted glass |
| Electrical installation | Concealed or surface-mounted wiring according to the project, LED lighting and residual-current protection |
| Mechanical services | Fresh water, drainage and hot-water infrastructure |
| Capacity note | Approximately 2 independent use compartments |
Plans show example layouts. Dimensions, materials and equipment are confirmed for your project.
12 m²
12 m² · Layout D
3.0 x 4.0 mThe proposed arrangement for this 12 m² configuration is: Approximately 2 independent use compartments. Layout and technical scope are finalised in the approved project for the site and its users.
Enquire about this model ↗| Model floor area | 12 m² gross concept area |
|---|---|
| Approximate external dimensions | 3.0 x 4.0 m |
| Container height | 2.50 m external / approx. 2.20 m clear |
| Structural system | Galvanised light-steel cabin frame |
| External wall | 50 mm rock-wool insulated sandwich panel |
| Internal wall | Compact laminate and wet-area board |
| Roof | Galvanised covering, insulation and membrane |
| Floor | Slip-resistant ceramic over waterproofing |
| External door | 80 × 200 cm moisture-resistant steel door |
| Window | High-level PVC frames with frosted glass |
| Electrical installation | Concealed or surface-mounted wiring according to the project, LED lighting and residual-current protection |
| Mechanical services | Fresh water, drainage and hot-water infrastructure |
| Capacity note | Approximately 2 independent use compartments |
Plans show example layouts. Dimensions, materials and equipment are confirmed for your project.
RELATED PRODUCTS
Explore the alternatives.
LET’S PLAN YOUR PROJECT
Let’s build the container
your project needs.
Share the size, intended use, quantity and destination. Let’s define the technical scope together.